1” Anchor Bolt Kit
- Anchor bolts featuring zinc-plated double nuts and washers.
- Galvanized anchor bolts with nuts and washers
- Anchor bolts conform to ASTM F 1554-07a
Grade 55 with a minimum yield strength of
55,000 psi. - Compatible with all 5×5 Square Poles.
Related products
-
Bullhorn Light Pole Bracket, Light Pole & Accessory
TV-4 INLINE BULLHORN ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-TV4-IN-RD -
Arms, Light Pole & Accessory
1 LIGHT ARM SQUARE
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-1LGT-SQ -
Arms, Light Pole & Accessory
3 LIGHT ARM 120D ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-3LGT-T-RD -
Arms, Light Pole & Accessory
2 LIGHT ARM 180D ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-2LGT-180-RD -
Light Pole & Accessory, Wall Mount
2 Hole Wall Mount
0 out of 5(0)This bracket is designed to fit on square poles and wall mount. Attach the bracket by drilling two holes on the side of the pole. The horizontal arm (tenon) is 2 3/8 inches in outside diameter. Any standard 2 3/8 inch slip fitter will fit over this bracket.
SKU: BRT-ACC-2HOLE