3/4” Anchor Bolt Kit
- Anchor bolts featuring zinc-plated double nuts and washers.
- Galvanized anchor bolts with nuts and washers
- Anchor bolts conform to ASTM F 1554-07a
Grade 55 with a minimum yield strength of
55,000 psi. - Compatible with all 4×4 Square Poles.
Related products
-
Arms, Light Pole & Accessory
3 LIGHT ARM Y-SHAPE ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-3LGT-Y-RD -
Arms, Light Pole & Accessory
2 LIGHT ARM 90D ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-2LGT-90-RD -
Light Pole & Accessory, Steel Light Pole
4X4 SQUARE STRAIGHT POLES
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strength of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI (Custom Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-SQP-XX-4X4-BRZ -
Arms, Light Pole & Accessory
1 LIGHT ARM ROUND
0 out of 5(0)Fabricated from the Highest Grade Structural steel cast iron on selected models.
-Conforms to ASTM-A 500 grade B: minimum yield strenght of 46,000PSI
-Choice of two shaft strengths:- Minimum yield of 46,000 PSI
- Minimum yield of 55,000 PSI(Special Order)
-Polyester power-coat finish to ensure maximum paint adhesion. Baked at 400 degrees to ensure maximum hardness and durability. Wall thickness available in gauge 11(.120”) or gauge 7(.180)
SKU: BRT-ACC-1LGT-RD -
Bullhorn Light Pole Bracket, Light Pole & Accessory
TV-2 BULLHORN SQUARE
0 out of 5(0)The bottom portion of this bracket has a 3 5/8 inch Outside diameter allowing it to sit in the pole. Each tenon on top has a 2 3/8 inch outside diameter allowing any light fixture with a standard 2 3/8 inch slip fitter to slide over it. This bracket is available with a standard dark bronze finish however.
SKU: BRT-ACC-TV2-SQ